KING Dome 9704-LP, Руководство пользователя

Страница: 15 / 36

Page 13
The KING Dome is factory pre-set for DIRECTV standard digital programming broadcast from the
101° W satellite.
If you also receive your local channels from DIRECTV’s 119 satellite or if you subscribe to DISH or
Bell TV programming, you must configure the antenna to work with your satellite service. Doing
this will allow the KING Dome to lock on the correct satellites to receive your programming and also
enable automatic satellite switching via the receiver’s remote control for multi-satellite service.
Antenna configuration is a one time procedure that
MUST BE COMPLETED
before using your
KING Dome antenna.
To configure your antenna, follow these steps:
1. ANTENNA CONFIGURATION
Configure the antenna for your service.
You can use either:
A) the supplied wall mount controller (page 14).
OR
B) 1844 Keypad (page 19).
2. DISH AND BELL TV CHECK SWITCH TEST
For all DISH and Bell TV services:
Configure your receiver for mobile use by running a check switch test (page 23).
Section 4
ANTENNA CONFIGURATION
1844 Keypad