SAFETY PRECAUTIONS
• The jack is designed for assembly / disassembly of automotive gearbox. Do not use for other purpose.
• The jack is designed for use on hard, flat surface that is able to withstand the current load. Using on
sloping and very soft surface, can lead to damage the cargo or personal inquiry.
• Do not exceed the jack’s rated capacity.
• Always rest the load on the central part of the jack saddle.
• Check before use, if load volume fit to the size of the jack saddle.
• Before starting work, make sure that the vehicle is raised at the proper, safe height, and that it is adequate
-
ly protected against displaced.
• Before lifting or lowering the load, make sure that all person are at a safe distance.
• Before lifting or lowering the loads, make sure that it is firmly positioned on the jack saddle and it is not
possible to slide up from the saddle.
• The load should be lowered very slowly, rapidly lowering may damage the hydraulic system and conse
-
quently, to the fall of the load and its damage.
• During work, the jack should be secured in such way that it can not move the jack with a raised object.
• Personnel associated with the use and maintenance of the equipment must be careful, skilled, knowledge
-
able, and trained, in the safe use of the equipment and its proper use.
• Before working with the jack, carefully evaluate its technical condition.
• Do not use the jack if you see any defect. Only fully functional jack ensures safe operation.
• Before each use, inspect the oil. To refill, use only new oil for hydraulic equipment. Do not use any brake
fluids, motor oils, alcohol or other detergents.
• All the moving parts must always be well oiled.
• During the jack operation, the operator must constantly observe and make sure the device works properly.
• If jack tips or leans, stop what you are doing and moving quickly to a safe distance. Do not try to hold or
steady jack.
• During transport this jack with or without load, make sure saddle must be maximum lowered. Pay attention
to the objects which lie on the ground and can cause jack fall with load.
• Never work under or in close proximity to the load, which is supported only by a jack. Immediately secure
the load on saddle and transport load to the final working place.
