manualshive.com logo in svg

King Quest VQ4100-OE, Руководство пользователя

Поделиться
Скачать
King Quest VQ4100-OE Скачать руководство пользователя страница 27

Page 25

13     MAINTENANCE

KING Satellite Systems are designed to be maintenance and trouble free.

For optimum performance, keep the dome clean from dirt, bugs, and other debris.  Periodic washing 

of the dome with mild soap and water is recommended.

If you plan on storing your vehicle for long periods of time, it is recommended that the system be put 

through a search procedure on a quarterly basis to keep all moving parts in good working order.

If you have any comments or questions, please contact the KING Service Department at 

 

(952) 922-6889, or by email at [email protected].

Rain Fade

Rain or dew on the dome can cause signal interference and make the digital picture freeze, pixelate 

or go out altogether.  This loss of signal is commonly referred to as “rain fade” and is caused by the 

combination of water in the atmosphere and water on the dome surface.  

To minimize this issue and eliminate the effects of water on the dome, apply KING 

Dome Magic

®

 rain 

fade solution to the dome.  This will prevent water from adhering to the dome surface and blocking 

the signal.  For additional details on 

Dome Magic

®

 rain fade solution please contact an authorized 

dealer or call KING at (952) 922-6889.

IMPORTANT! Do not power wash the KING Quest.

Single Application Packet #1830-SP

Spray Can #1830

NOTE:  

Dome Magic

®

 may leave a white residue on the dome surface.

 

This will not affect the performance of the antenna.

Содержание VQ4100-OE





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды