King Quest PRO VQ4800, Руководство пользователя

Страница: 6 / 20

Page 4
4 OPERATION
IMPORTANT!
Plug in power supply last.
Do not move antenna unit after
plugging in power supply as the
antenna has begun scanning.
PLEASE BE PATIENT!
The antenna unit may lock onto the satellite in as little as 2 minutes,
but may occasionally take up to 10-15 minutes.
IMPORTANT!
Place power inserter in
an accessible location.
IMPORTANT!
Any tall objects can block
the signal from reaching
the antenna.
Do not overtighten the coax connections.
Do not route the coax cable where it can be tripped on or run over by a vehicle.
Do not put sharp bends or kinks in the coax cable.
Place the antenna unit in a position with a clear view of
the southern sky to scan for the DIRECTV 101 satellite.
Make connections 1-3 in the order shown.
Place the KING Quest Pro on a stable and reasonably level surface with a clear view of the southern
sky. When placing the KING Quest Pro in position, be sure surface is dry and free of loose dirt or sand.
When all connections are made, the antenna will scan for the DIRECTV 101 satellite.
When the satellite is found, your programming will appear. Enjoy!
The KING Quest Pro is not programmed to lock onto the 119 satellite, so you will not receive your local channels
if they are broadcast from the 119. If you wish to receive programming from the 119 as well as the 101, you can
replace the power inserter with the KING UC1000 Controller (sold separately - see your dealer or our website
kingconnect.com for details.)