background image

     

A Top Safety and Protection Solution In The Worldwide! 

   www.GSMalarmsystem.com

 

King Pigeon Hi-Tech. Co., Ltd.      Page 

 of 21  Ver 1.2     File No.: 35260011

 

PIN 6 

GND 

PIN 7 

Wired sensor input 1 (e.g.: Temperature sensor.) 

PIN 8 

Wired sensor input 2(e.g.: Photoelectric Beams Sensor.) 

Tips: 

1.  The Output relay is similar the Power Switch, you can use it to control the light, 

gate,DVR and other applications. Its drived by 5VDC, related voltage is 

2A/250VAC,<40W, when you use high vlotage applications, please note the 

cables. 

 

5. Features 

1)  GSM Frequency: Dual-Band(900/1800MHz), Quad-Band is 

optional(850/900/1800/1900Mhz) ; 

2)  Supports armed, disarmed by SMS or remote control or telephone; 

3)  Supports start or stop the siren by telephone or SMS command; 

4)  Supports Swith On or Off the output relay by telephone or SMS 

command; 

5)  Automaticed send SMS Alert and dial to the pre-set cellphone when 

any sensor triggered; 

6)  Equips with 2 Wired Zones,NC/NO, and Zone Name is editable; 

7)  Equips with 8 Wireless Zones, Zone Name is editable; 

8)  Supports 3 SMS alarm cellphones and 5 dial alarm telephone numbers; 

9)  Equips with 1 relay output, it likes a switch, use for driving DVR, light, 

gate or other electric appliances once the system activated; 

10) Reserved 12VDC power source from the control unit for wired sensors; 

11) Supports external power failure&recovery alert function; 

12) Supports wiretap through internal Mircophone; 

13) Supports wired and wireless siren; 

14) Supports alert user by SMS when the remote control has been used to 

control the system; this function can enable or disable by user; 

Содержание S3526






















Отзывы: