King Pigeon BL280 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 52

King Pigeon BL280 Скачать руководство пользователя страница 5

Page

5 of 52

King Pigeon Communication Co., Ltd.

www.iot-solution.com

Wireless Data Acquisition System - LoRa Gateway BL280

1 Product Introduction

1.1 General Introduction

Wireless Data Acquisition System BL280 is based on LoRa RF technology. It’s mainly used for
collecting multiple environmental data distributed in different long range areas and transparent data
transmission from device to cloud. With LoRa modulation technology, it’s capable of realizing
multiple IO device monitoring, collecting data of temperature & humidity, light intensity, CO2, wind
direction & speed and soil conditions.

LoRa communication range is up to 2KM.Built-in LoRa chip SX1278 and GSM/GPRS/3G/4G/RJ45
module work together to achieve remote monitoring and control by sending sensor, PLC, smart
meter and other device data to cloud or mobile phone via SMS/2G/3G/4G/Ethernet. Huge field
wiring cost will be saved

This wireless data acquisition system comprised of 2 parts, LoRa Gateway BL280 and LoRa Nodes.
Nodes connect senor, PLC and other devices. The collected data is sent to gateway. Mutual
communication between PLC and cloud is done through wireless RF technology. Alarm threshold
can be set in gateway so that alarm events can be recorded.

«
...
3
4
5
6
7
...
»

Содержание BL280





















































Отзывы:

Нет отзывов