GSM 3G WIFI Camera Alarm System
9
The video setting in PC.
Click on the monitor screen, select
【
start video
】
(Notice: the video will save the local on your PC)
Playback: this device can playback the video from computer, open the CMS software, choose
“
playback
”
, user can find the playback files according to the data, the play it directly.
(Note: the video in computer hard disk only can be played in PC, does not support playing in mobile)
Restore factory settings
Reset will delete all user settings: including WIFI information, access password, alarm information,
arming zones information.
The steps: find the reset hole at the button of the device, and then use needle to insert it, press it
more than three seconds after hearing “di” sound, when hearing the sound like” drawing the sword”
reset successfully.
5. The Settings of GSM Alarms.
The SMS commands below are send to the SIM card of WIFI Camera for remote configuration.
Notice:
1) All the letters in SMS commands must be CAPITALIZED under the English format.
2) The Examples below are only for reference, please send the SMS commands according to your actual situations.
3) The default password (1234), please use the new password when the default password was changed.
1
）
Enable
/
Disable the GSM Alert.
SMS Commands
Return SMS Message
Pa SA
X
#
Set OK!
For Example
:
1234SA
0
#
Notice :
X
：
0 or 1
1234SA
0
#
：
Only when the WIFI network failed, the SMS or phone call notification will be activated.
1234SA
1
#
：
The SMS and Phone Call notification is always working. (The Factory Default)
