King-Meter Digital II Скачать руководство пользователя

Страница: 16 / 22

8.8 System Setting

8.8.1Battery Power Delay Time Setting

DLY stands for battery power delay time. Use
Short press

【

MODE

】

to confirm and enter max speed limit setting interf

8.8.2Max Speed Limit Setting

MAX SPD stands for the max speed limit
25-40Km/h. Short press

【

MODE

】

to confirm and enter button walk assist enable/disable setting int

default is 40km/h.

This setting parameter is the upper limit specified by the display manufacturer.

8.8.3 Button Walk Assist Enable/Disable Setting

PUS stands for button walk assist enable. Switch Y/N by
long press

【

DOWN

】

, walk assist function can be realized.

【

MODE

】

to confirm and enter the walk assist speed setting. The default is Y.

8.8.4 Walk assist speed setting

PU stands for button walk assist speed setting. By setting the value of walk assist speed, the walk assist speed can
be adjusted to meet the different riders
“20-35”. Short press

【

MODE

】

to confirm and en

output 25%).

KING-METER TECHNOLOGY

No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN

Fax

：

+0086 022 8478 0358

Battery Power Delay Time Setting

stands for battery power delay time. Use

【

】

and

【

DOWN

】

to select battery power delay ti

to confirm and enter max speed limit setting interface. The default is

limit. Set the max speed limit by

【

】

and

【

DOWN

to confirm and enter button walk assist enable/disable setting int

This setting parameter is the upper limit specified by the display manufacturer.

Button Walk Assist Enable/Disable Setting

PUS stands for button walk assist enable. Switch Y/N by

【

】

and

【

DOWN

】

. Y stands for enabl

, walk assist function can be realized. N stands for disable, that is no walk assist

to confirm and enter the walk assist speed setting. The default is Y.

r button walk assist speed setting. By setting the value of walk assist speed, the walk assist speed can

be adjusted to meet the different riders’ requirement. Through the adjustment of

【

】

to confirm and enter the slow start setting interface. The default of display is 25(I.E.

METER TECHNOLOGY CO., LTD

No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN

+0086 022 8478 0358 Tel: +0086 022 8478

o select battery power delay time 3/6/12s.

ace. The default is 3s.

DOWN

】

, the setting range is

to confirm and enter button walk assist enable/disable setting interface. The

. Y stands for enable, that is, after

, that is no walk assist. Short press

r button walk assist speed setting. By setting the value of walk assist speed, the walk assist speed can

】

【

DOWN

】

, the range is

ter the slow start setting interface. The default of display is 25(I.E.

Содержание Digital II























Результаты поиска

Содержание Digital II

Отзывы:

Похожие инструкции для Digital II

Бренды по названию

Популярные бренды

King-Meter Digital II, Руководство пользователя

Результаты поиска

Содержание Digital II

Отзывы:

Похожие инструкции для Digital II

Бренды по названию

Популярные бренды