King Long XMQ6120C series, Руководство по эксплуатации

Страница: 80 / 137

Vehicle Starting and Driving
S-28
Starting the vehicle
The vehicle could only be started when braking system pressure has reached 5kg/cm
2
above and each
instrument and indicator lamp is on the proper condition, and water outlet temperature exceeds 60 ℃ as well
as the parking brake has been released after the engine is started. Please make the startup in shift I.
On normal running condition:
 Pointer of oil gauge should be between 0.3 and 0.5Mpa
（
3-5kg/cm
2
）
.
 Pointer of water temperature gauge should be between 83 ℃ and 95 ℃ .
 Pointer of double-pointer barometer should be between 0.55 and 0.8 Mpa （ 5.5-8kg/cm
2
）
After the vehicle starting, gear shifting should be made step by step and timely. The clutch pedal should not be
released abruptly to impulse the starting when the vehicle is stuck in the mud or can not start on a spoil road.
The following problems should also be paid attention to during the driving
① If abnormal noise or odor occurs, please stop vehicle to check.
② Abrupt acceleration or emergency braking should be avoided as might.
③
Don't put foot on the clutch pedal during the driving.
④
Avoid engine overspeed. When driving long downhill, engine may overspeed easily after gearshift, at
this time, pay attention to apply exhaust brake or retarder and driving brake to ensure engine run at
specified speed.
⑤ During driving downhill, never stop engine, otherwise, resulting in de-pressure in brake pipeline and
power steering gear failure.
During normal running condition
，
if the pointer of water temperature gauge is under the red sign that indicated
the vehicle is on normal condition. if the pointer is on “H”