11
The griddle must be installed before lighting your cooker.
NEVER install the griddle after a burner has been lit.
ALWAYS use the supplied drip pan when using the griddle.
The griddle and drip pan will be extremeley hot during and after use.
NEVER attempt to move the griddle and appliance until it has completely
cooled [100° F (38°C].
Figure 4
5. To attach windguard shield to the top frame, align the windguard shield to top frame as per
Figure 5
. Slide windguard into receiving U Clips welded to the cooker frame. The short side of the
windguard shield should be placed on the side with the drip pan. See
Figure 5
below.
Figure 5
WINDGUARD SHIELD
4. The cooker includes a griddle as an accessory. When cooking with a pot(s), do not install the griddle.
Follow the below directions for installation of the griddle and drip pan:
a. The supplied drip pan is to be used when using the griddle. The drip pan is designed to
collect any grease drippings which drain through the hole in the griddle channel. Attach drip
pan to cooker frame by sliding the two holes provided on the drip pan over the two tabs that
extend on the outside of the front, right corner of the cooker frame. See below
Figure 3
for
correct placement of drip pan.
b. The griddle has two receivers that extend from its bottom. Place the two receivers of the griddle
over the two prongs that are located on the rear of the cooker frame. See below
Figure 3 and
Figure 4
. Make sure griddle is installed level and is stable.
Figure 3
Drip
Pan
Prong
Griddle