(714) 891-0008 • www.kinginstrumentco.com
When it comes to flow...we’re instrumental.
5
7520 - 7530 Series
Installation Instructions
Installation Instructions
7520 SERIES ASSEMBLY
3C, 5C, 6C, 7C BLOCK
PARTS LIST:
1. Acrylic Meter Block
2. End Fitting O-Ring
3. Outlet End Fitting
4. Inlet End Fitting
5. Mounting Stud Assembly
6. Top Plug / Guide Rod
7. Float
7530 SERIES ASSEMBLY – WITH INLET VALVE
3C, 5C, 6C, 7C BLOCK
PARTS LIST:
1. Acrylic Meter Block
2. End Fitting O-Ring
3. Outlet End Fitting
4. Inlet End Fitting
5. Mounting Stud Assembly
6. Top Plug / Guide Rod Assembly
7. Float
8. Valve Spacer (3C and 5C in
Brass and Stainless Steel only)
9. Valve O-Ring
10. Valve Assembly
12700 Pala Drive, Garden Grove, CA 92841
www.kinginstrumentco.com / (714) 891-0008
Meters are warranted against defects in materials and workmanship
to the original user for a period of thirteen (13) months from the date
of factory shipment, provided the meter is installed, operated and
maintained in accordance with King Instrument Company's
instructions and recommendations.
This warranty does not apply if failure is caused or contributed to by
any of the following: improper handling, improper storage, abuse,
unsuitable application of the product, lack of reasonable and
necessary maintenance, use exceeding suggested pressure and
temperature maximums, improper packaging for return, or repairs
made or attempted to be made by anyone other than King Instrument
Company, Inc.
KING INSTRUMENT COMPANY, INC. MAKES NO
WARRANTY AS TO THE FITNESS OF ITS PRODUCTS
FOR SPECIFIC APPLICATIONS.
This warranty is valid for the original end-user only and does not
apply to products that have been damaged or modified. This
warranty is non-transferrable and is limited to replacement or repair.
The liability of King Instrument Company arising out of its supply of
the products, or their use, shall not in any case exceed the cost of
correcting defects in the products as set forth above.
THIS WARRANTY IS A LIMITED WARRANTY AND
SHALL BE IN LIEU OF ANY OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THERE ARE NO OTHER WARRANTIES
WHICH EXIST BEYOND THE DESCRIPTION OR FACE
HEREOF.
IN NO EVENT SHALL KING INSTRUMENT COMPANY BE
LIABLE FOR LOSS OF PROFITS, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Products should be returned, prepaid, to King Instrument Company,
Inc. with proof of purchase. Call factory for Return Merchandise
Authorization (RMA) number and return instructions.
2012A
SEPT
ACRYLIC METER BLOCK
BACK PLATE
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
END FITTING NUT
ASSEMBLY
FLOAT
ACRYLIC METER BLOCK
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
FLOAT
ACRYLIC METER BLOCK
BACK PLATE
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
END FITTING NUT
TOP PLUG / GUIDE ROD
VALVE O-RING
VALVE ASSEMBLY
ASSEMBLY
FLOAT
TOP PLUG / GUIDE ROD
MOUNTING STUD
ASSEMBLY
TOP PLUG / GUIDE ROD
ACRYLIC METER BLOCK
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
FLOAT
MOUNTING STUD
ASSEMBLY
TOP PLUG / GUIDE ROD
VALVE ASSEMBLY
VALVE SPACER
VALVE O-RING
12700 Pala Drive, Garden Grove, CA 92841
www.kinginstrumentco.com / (714) 891-0008
Meters are warranted against defects in materials and workmanship
to the original user for a period of thirteen (13) months from the date
of factory shipment, provided the meter is installed, operated and
maintained in accordance with King Instrument Company's
instructions and recommendations.
This warranty does not apply if failure is caused or contributed to by
any of the following: improper handling, improper storage, abuse,
unsuitable application of the product, lack of reasonable and
necessary maintenance, use exceeding suggested pressure and
temperature maximums, improper packaging for return, or repairs
made or attempted to be made by anyone other than King Instrument
Company, Inc.
KING INSTRUMENT COMPANY, INC. MAKES NO
WARRANTY AS TO THE FITNESS OF ITS PRODUCTS
FOR SPECIFIC APPLICATIONS.
This warranty is valid for the original end-user only and does not
apply to products that have been damaged or modified. This
warranty is non-transferrable and is limited to replacement or repair.
The liability of King Instrument Company arising out of its supply of
the products, or their use, shall not in any case exceed the cost of
correcting defects in the products as set forth above.
THIS WARRANTY IS A LIMITED WARRANTY AND
SHALL BE IN LIEU OF ANY OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THERE ARE NO OTHER WARRANTIES
WHICH EXIST BEYOND THE DESCRIPTION OR FACE
HEREOF.
IN NO EVENT SHALL KING INSTRUMENT COMPANY BE
LIABLE FOR LOSS OF PROFITS, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Products should be returned, prepaid, to King Instrument Company,
Inc. with proof of purchase. Call factory for Return Merchandise
Authorization (RMA) number and return instructions.
2012A
SEPT
ACRYLIC METER BLOCK
BACK PLATE
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
END FITTING NUT
ASSEMBLY
FLOAT
ACRYLIC METER BLOCK
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
FLOAT
ACRYLIC METER BLOCK
BACK PLATE
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
END FITTING NUT
TOP PLUG / GUIDE ROD
VALVE O-RING
VALVE ASSEMBLY
ASSEMBLY
FLOAT
TOP PLUG / GUIDE ROD
MOUNTING STUD
ASSEMBLY
TOP PLUG / GUIDE ROD
ACRYLIC METER BLOCK
END FITTING O-RING
OUTLET END FITTING
INLET END FITTING
FLOAT
MOUNTING STUD
ASSEMBLY
TOP PLUG / GUIDE ROD
VALVE ASSEMBLY
VALVE SPACER
VALVE O-RING
