King Industrial KC-7200C Скачать руководство пользователя страница 3

GENERAL SAFETY INSTRUCTIONS 

FOR POWER TOOLS

1. KNOW YOUR TOOL

Read and understand the owners manual and labels affixed to
the tool. Learn its application and limitations as well as its
specific potential hazards. 

2. GROUND THE TOOL.

This tool is equipped with an approved 3-conductor cord and
a 3-prong grounding type plug to fit the proper grounding type
receptacle. The green conductor in the cord is the grounding
wire. 

NEVER

connect the green wire to a live terminal.

3. KEEP GUARDS IN PLACE.

Keep in good working order, properly adjusted and aligned.

4. REMOVE ADJUSTING KEYS AND WRENCHES.

Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.

5. KEEP WORK AREA CLEAN.

Cluttered areas and benches invite accidents. Make sure the
floor is clean and not slippery due to wax and sawdust build-
up. 

6. AVOID DANGEROUS ENVIRONMENT.

Don’t use power tools in damp or wet locations or expose
them to rain. Keep work area well lit and provide adequate
surrounding work space.

7. KEEP CHILDREN AWAY.

All visitors should be kept a safe distance from work area.

8. MAKE WORKSHOP CHILD-PROOF.

-with padlocks, master switches or by removing starter keys.

9. USE PROPER SPEED.

A tool will do a better and safer job when  operated at the
proper speed.

10. USE RIGHT TOOL.

Don’t force the tool or the attachment to do a job for which it

was not designed.

11. WEAR PROPER APPAREL.

Do not wear loose clothing, gloves, neckties or jewelry (rings,
watch) because they could get caught in moving parts. Non-
slip footwear is  recommended. Wear protective hair covering
to contain long hair. Roll up long sleeves above the elbows.

12. ALWAYS WEAR SAFETY GLASSES.

Always wear safety glasses (ANSI Z87.1). Everyday
eyeglasses only have impact resistant lenses, thet are 

NOT

safety glasses. Also use a face or dust mask if operation is
dusty.

13. DON’T OVERREACH.

Keep proper footing and balance at all times.

14. MAINTAIN TOOL WITH CARE.

Keep tools sharp and clean for best and safest performance.
Follow instructions for lubricating and changing accessories.

15. DISCONNECT TOOLS.

Before servicing, when changing accessories or attachments.

16. AVOID ACCIDENTAL STARTING.

Make sure the swich is in the ‘’OFF’’ position before plugging
in.

17. USE RECOMMENDED ACCESSORIES.

Consult the manual for recommended accessories. Follow the
instructions that accompany the accessories. The use of
improper accessories may cause hazards.

18. NEVER STAND ON TOOL.

Serious injury could occur if the tool tips over. Do not store
materials such that it is necessary to stand on the tool to reach
them.

19. CHECK DAMAGED PARTS.

Before further use of the tool, a guard or other parts that are
damaged should be carefully checked to ensure that they will
operate pro- perly and perform their intended function. Check
for alignment of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard or
other parts that are damaged should be properly repaired or
replaced.

20. NEVER LEAVE MACHINE RUNNING

UNATTENDED.

Turn power ‘’OFF’’. Don’t leave any tool running until it comes
to a complete stop.

SPECIFIC SAFETY INSTRUCTIONS 

FOR YOUR METAL DUST COLLECTOR

WARNING:

To reduce the risk of fire, electric shock or injury:

1) Read and understand this owners manual and all the labels on the

metal dust collector before operating. Use only as described in this
manual. To avoid personal injury or damage to your metal dust
collector, use only recommended accessories.

To avoid fire or explosion:
2) Do not use this metal dust collector near flammable or combustible

liquids, gases, gasoline or other fuels, lighter fluid, cleaners,
oil-based paints, natural gas, hydrogen, or explosive dusts like coal
dust, magnesium dust, grain dust or gun powder.

3) Do not vacuum anything that is burning or smoking, such as

cigarettes, matches or hot ashes.

4) To avoid health hazards from vapors and dust, do not vacuum toxic

materials.

5) Do not use or store near hazardous materials.

6) Do not use outdoors or on wet surfaces.

7) Place metal dust collector on a stable, level surface.

8) Keep hoses and electric cord out of traffic areas.

Содержание KC-7200C









Отзывы: