SIMPLE PUSH STICK
1.
The simple push stick can be made by the user of the machine. Make the simple push
stick as shown below.
2.
When undertaking planing operations, ensure the lid of the simple push stick catches the
tail edge of the workpiece. This will maintain adequate pressure so that the workpiece
staypin will keep in contact with the fence and table.
PUSH BLOCK
This is the suggested type of push block which can be purchased from your local
KING CANADA distributor.
K-1400
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts
diagram and parts list.
