LUBRICATION
Lubrication Guide for Industrial Planer KC-390FX
No.
Position
Interval
Suitable Types of Lubricants
1
Chains
Frequently
Grease
2
Gear Box
When operated more than 2,500 hours
HD-100, Mobil Gear 627, Shell Omala 100,
ESSO Spartan EP-1004
3
Roller Brackets
Frequently
SAE-30
4
Worm Gear
Frequently
Grease
5
Lead Screws
Frequently
Grease
6
Columns
Frequently
SAE-30
7
Chain
Frequently
Grease
8
Bushings
Frequently
SAE-30
FIGURE 30
FIGURE 31
FIGURE 32
LUBRICATION GUIDE FOR GEAR BOX
The gear box lubricant must be replaced every 2,500 hours of operation.
Suitable lubricant is multi-purpose gear box lubricant.
To replace oil in gear box:
1. Remove the drain plug (A) Fig.30 and oil level cap (B), drain dirty oil
thoroughly.
2. Reposition and tighten the drain plug (A).
3. Remove cap screw (C) Fig.31 and pour oil through cap screw hole. Fill
the gear box with oil until the oil starts coming out of the oil level cap hole
(B).
4. Reposition and tighten the oil level cap (B) and the cap screw (C).
Below you will find lubrication instructions and maintenance intervals to maintain your planer in good working order. Failure to upkeep your
planer as prescribed on this page will reduce its life span. The No. in chart below refers to the figures below.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.
