ASSEMBLY
INSTALLING SAFETY SWITCH TO LEG
1) This floor stand comes with a safety switch which normally is installed to
the front right side leg of the stand. Position the switch bracket (A) Fig.8
over the front right leg (B) as shown. Secure the switch bracket using 2
long pan head screws (C).
Note:
This switch comes with a 120V receptacle (D) Fig.8 which allows you
to connect the router power cord to control the on/off function of the router.
This receptacle is rated max. 15 amps.
INSTALLING STORAGE COMPONENTS
1) This stand comes with a storage bracket (A) Fig.9 which is used for
storing the crank handle which comes with optional Router Lift
(mod. XL-125).
2) Install storage bracket (A) to front left leg (B) using a cap screw and
washer (C).
3) Two pan head screws (A) Fig.10 and 4 hex. nuts are supplied. They are
mounted to the left side top cross brace as shown. These pan head
screws are used to hang accessories such as the insert ring wrench
which comes with optional Router Lift (mod. XL-125) or the Phenolic
Router Insert Plate (mod. XL-114).
FIGURE 8
FIGURE 9
FIGURE 10
