manualshive.com logo in svg

King-Griller 3008, Руководство пользователя

Поделиться
Скачать
King-Griller 3008 Скачать руководство пользователя страница 34

 

OM3008 B.3                               

™ & ©  Char-Griller / A&J Mfg.   

                                          36 

P.O. Box 30864 

Sea Island, GA 

31561 

912-638-4724 

www.CharGriller.com

 

Warranty Information – Gas Grill 

 

Char-Griller® will repair or replace any defective part of its grillers/
smokers for a period of up to one year from the date of purchase. 
Char-Griller® will also repair or replace the body (lid and bottom 
half) of its grillers/smokers if the metal is rusted through or burned 

through for a period up to five years.  Char-Griller will repair or re-
place any defective part of its side fire boxes for a period up to one 
year from the date of purchase. Char-Griller® gas grill burners have 
a five year warranty from the date of purchase. 

 
Proof of purchase, proof of purchase date and prepaid return of the 
item in question may be required. Misuse, abuse, or commercial 
use nullifies all warranties. Paint/finish is not warranted. Products 

are not warranted against rust.  
 
The warranty is for replacement of defective parts only. Manufac-
ture will not be responsible for damage resulting from accident, al-

teration, misuse, abuse, hostile environments, improper installation, 
installation not in accordance with local codes of service of unit. 
 
 

This limited warranty does not cover any scratches, dents , corro-
sion or discoloring by heat, abrasive and chemical cleaners nor any 
components used in the installation of the appliance. 

Save your receipt for all warranty claims. 

Содержание 3008



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды