Page 8
Multi-Point Process Switch
EX-1711
®
KING-GAGE
S
E
T
1
S
E
T
2
S
E
T
3
S
E
T
4
MULTI-POINT
Process Switch
1
2
3
4
Coarse Adj.
Fine Adj.
Coarse Adj.
Fine Adj.
Coarse Adj.
Fine Adj.
Coarse Adj.
Fine Adj.
POWER
LED Status
Indicators
User
Set-Points
C
NO
NC
SPTD
(Form-C)
Not Energized
LED not
illuminated
C
NO
NC
SPTD
(Form-C)
Energized
LED
illuminated
Adjustable Set-Points
The Process Switch has four (4) user set-points that can be
adjusted to control continuous process operations, provide
fail-safe limiting or alarm functions.
Front Panel
- LED Status Indicators are located on the
front panel of the Process Switch. Each of the four (4) LEDs
correspond to “SET1, SET2, SET3, SET4" adjustments and
output relays. When illuminated, the LED indicates that
the set-point has been reached and
corresponding relay energized.
SPDT (Form-C) Output Relays
Four (4) independent SPDT (single-pole/double-throw) relays
are provided on the Process Switch. Form-C configuration
includes normally-open (N.O.), normally-closed (N.C.) and
common (C) relay contacts. Rated for 3.0 Amps maximum
@ nominal 115 Vac.
Relay is energized when corresponding set-point milliamp
value is exceeded.
