King-Dome Relay KD5500, Инструкция по установке и эксплуатации

Страница: 10 / 32

Page 8
1. Plug your receiver and TV into a 110 volt AC power source.
The green light on your receiver should illuminate or begin cycling on and off. Wait for the
green light to turn solid (this may take up to two minutes).
If the green light does not illuminate after two minutes, power on your receiver using the
front panel power button.
Section 4
OPERATION
2. Turn on your TV.
Use your TV’s input selection menu to select the input that matches the connection to your
DISH receiver, i. e. if using an HDMI cable connection you should select the HDMI TV input.
IMPORTANT: IF YOUR RECEIVER IS NEW AND NOT YET ACTIVATED, YOU MUST PERFORM THE FIRST TIME
SETUP ON PAGE 12 BEFORE USING THE INSTRUCTIONS ON THIS PAGE.
THIS ANTENNA IS DESIGNED TO WORK AUTOMATICALLY WITH DISH MODEL ViP211z, ViP211k,
ViP211 AND 411 RECEIVERS AND WILL NOT WORK WITH OTHER DISH RECEIVER MODELS OR
WITH EQUIPMENT FOR OTHER SATELLITE TV SERVICE PROVIDERS.
IMPORTANT!
The antenna unit requires a “direct line of
sight” to the satellites for signal reception.
Any tall objects such as poles, trees,
buildings, mountains, etc. can all block the
signal from reaching the dish.