background image

2000 WATT GENERATOR

3

NOTE:

4) ELECTRIC SHOCK PREVENTION

- Never operate the engine in rain or snow.
- Never touch the machine with wet hands or electrical shock will occur.
- Be sure to ground (earth) the generator.

- Use ground (earth) lead of sufficient current
  capacity. Ground (earth) lead Diameter :
  0.12mm(0.005 in)
- Some types of generators have no ground bolts,
  so do not operate the machine in rain or snow!
  While the machine is operating, don’t touch it with wet hands!

5) CONNECTION NOTES

 - Avoid connecting the generator to commercial power outlet.
-  Avoid connecting the generator in parallel with any other generator.

6) BATTERY

- No smoking while handing the battery.
- The battery emits flammable hydrogen gas,which can explode if exposed
  to electric arcing or open flame.
- Keep the area well-ventilated and keep open flames/sparks away when
  handing the battery.

2. CONTROL FUNCTION

1) ENGINE SWITCH

The engine switch controls the ignition system.

OWNER’S MANUAL

4

“ON” ( “ENGINE SWITCH” on “RUN” position)
Ignition circuit is switched on.
The engine can be started.

“OFF”(”ENGINE SWITCH” on “STOP” position)
Ignition circuit is switched off.
The engine will not run.

2) AC AND DC PROTECTOR

The AC or DC breaker turns off automatically when the load exceeds the
generator rated output.

CAUTION:

Reduce the load to within specified 
generator rated output if the protector 
turn off !

3) COMPONENTS

ENGINE SWITCH

AC PROTECTOR

1. Fuel tank
2. Fuel tank cap
3. AC socket

4. DC socket
5. Ground terminal
6. AC proctector

7. DC proctector
8. Oil filter cap
9. Oil drain plug
10. Engine switch

11. Starter
12. Air filter cover
13. Muffler
14. Spark plug
15. Choke lever

Содержание 8166-11




















Отзывы: