King Controls 1500-HD, Инструкция по установке и эксплуатации

Страница: 8 / 40

1. Remove and save the dome cover screws. (Figs. 6A and 6B) .
2. Carefully remove the dome cover. Do not allow dome cover to catch on internal
components or wiring.
3. Remove and discard the shipping bolt.
Page 6
COMPONENT LOCATION:
1. Select the location of the internal components using the following criteria:
a) The Controller, Tuner, HDTV Converter, Multi-switch and Power Supply should be in
the same general vicinity of the main satellite receiver, AND ACCESSIBLE FOR
OPERATION AND MAINTENANCE PURPOSES.
b) The Tuner should not be stacked directly on top of
other electronics. If located in a cabinet or other
enclosure, make sure there is adequate ventilation
around the unit.
(If using the Tuner mounting
brackets see page 17.)
c) The Controller should be conveniently located
for the end user. (If using the Wall Mount Faceplate,
see page 16.)
d) All components should be secured so they do not shift or bounce around during
vessel motion.
2. Place the components in the selected areas.
REMOVE SHIPPING RESTRAINTS
Note: Reference appropriate figure on next page for your model number:
Model 1500-HD: see Fig. 6A
Model 1800-HD: see Fig. 6B