SCREEN ASSEMBLY
8. Your enclosed canopy should now look like the one in figure #12 below. To set up your canopy with the
screens open you can “scallop” the screens and tie them at the corners for a more decorative look. Begin
by unzipping and detaching the hook and loop strip of one side of the screen (figure #13) and proceed to
“scallop” the screen in 2 - 3 inch intervals. Repeat the step for the other side of the screen until your corner
looks as shown in figures #14 and 15 on next page. Locate the wide belt like strap on the center inside
corner of the screen. Gather the center of your screen towards the leg where the strap is and wrap the
strap around the screen and leg. Attach the strap to the hook and loop tape on the belt to hold in place.
(See figures #16 - 18 on next page). Repeat step at the other 3 corners. Your completely open canopy
should now look like the one in figure #19.
9. If leaving you canopy up for an extended period of time please see our anchoring instructions on the next
page. We have also included stakes to hold your screens in place if set up on grass or soft surfaces. These
can be staked through the grommets on the lower part of your screen walls.
Figure #10
Figure #11
Figure #12
Figure #13
Join Zipper at
Top and Zipper
Screens Together.
