ASSEMBLY
INSTALLING TRANSPORT HANDLE TO PRESSURE TANK
All previous assembly instructions were done with the pressure tank positioned
upside down, now it is time to flip it right side up.
Locate the transport handle (A) Fig.4 and fix it to both pressure tank handle
brackets (B) using a pan head screw, washer and hex. nut on each side.
INSTALLING MALE QUICK CONNECT AND INTERMEDIATE CONNECTOR TO
AIR PRESSURE VALVE
The male quick connect (A) Fig.5 must be installed to the intermediate connector
(B) and then both must be installed to the air pressure valve (C).
To prevent air leaks, place teflon tape in a counterclockwise direction around the
threads of the male quick connect (A) and screw it into the intermediate
connector (B).
Place teflon tape in a counterclockwise direction around the threads of the
intermediate connector (B) and screw it into the air pressure valve (C).
PLACING LID WITH HANDLE INSIDE PRESSURE TANK
Locate the lid with handle (A) Fig.6. This lid gets placed into the opening of the
pressure tank. When compressed air is introduced into the pressure tank, lift the
handle up and the lid will be held in place by the build up of pressure in the tank.
See Fig.6.
Figure 4
Figure 5
Figure 6
