CHARGING
Using 120V Charger
Locate the 120V charger (A) Fig.3 and plug
it into the input jack (B) as shown. Plug in
the charger into an appropriate 120V power
outlet.
Using 12V Charger
Locate the 12V charger (C) Fig.3 and plug it
into the input jack (B). Plug in the charger
into an appropriate 12V cigarette lighter
outlet.
The work light comes with an indicator light
(D) Fig.3, a flashing red indicates the
battery is not fully charged. A red/green
indicator light means battery is charging, a
green indicator light indicates the battery is
fully charged. It can take up to 5 hours to
fully charge the battery.
ON/OFF/LIGHT INTENSITy SWITCH
Your work light is equipped with a sealed
On/Off switch (E) Fig.3 located on the side
of the work light. This switch controls the
light intensity (high/low). Move switch upwards to set light intensity to High. Move switch
downwards to set light intensity to Low. Move switch to the centre position to turn LED
light Off.
ADJUSTING THE LIGHT DIRECTION
Your work light can be tilted vertically. To adjust the light direction, loosen the side
locking knobs (F) Fig.3. Adjust the work light head to desired position, and retighten
knobs.
MAINTENANCE & SERVICE
Your work light requires very little care and maintenance. Simply clean the lens regularly
with a non-abrasive cleaner. Use similar care for the base and U-bracket. When
servicing, use only identical parts. Use of any other parts may create a hazard or cause
product damage. Contact a King Canada service centre for identical replacement parts.
RECyCLING
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact you local government for information regarding the
collection systems available. If electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and get into the food chain,
damaging your health and well-being.
CHARGING, OPERATION
& MAINTENANCE
FIGURE 3
