SWITCH (Wear Eye Protection)
The switch is located on the front of the grinder near the bottom. To turn the
tool "ON", depress the rocker switch at the top near the word "ON". To turn
the tool "OFF", depress the lower portion of the switch rocker, near the word
"OFF".
INSTALLING TOOL RESTS
TURN OFF AND UNPLUG THE BENCH GRINDER
Remove the tool rests from the top portion of the poly-foam carton liner and
install them to the wheel guards as shown in the figure. Use the bolts and
washers you removed from the bag to secure them in place, shown in the
Figure 4.
NOTE: There is a left and right tool rest. Refer to Figure 4 to ensure that you
install them correctly.
When in actual size, the tool rests should be adjusted to within 1/8" of the
grinding wheel or other accessory being used.
