background image

WARRANTY INFORMATION & 

SAFETY RULES FOR WET/DRY VACUUMS

2-YEAR 

LIMITED WARRANTY

FOR THIS WET/DRY VACUUM  

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARRANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS

Replacement parts for this tool are available at our authorized KING CANADA service centers across Canada. For servicing, contact or return to
the retailer where you purchased your product along with your proof of purchase. 

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality and durability standards. KING CANADA warrants to the
original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in
materials. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or  accidents, repairs or alterations and lack
of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for incidental, special or consequential
damages arising from the use of our products. To take advantage of this warranty, the product or part must be returned for examination by the
retailer. Shipping and handling charges may apply. If a defect is found, KING CANADA will either repair or replace the product.

ITEMS NOT COVERED UNDER WARRANTY

Accessories supplied with this vacuum such as the hose, gulper tool, crevice tool, round brush, foam filter and re-usable filter are not covered

under warranty and are available as optional accessories at your nearest King Canada distributor. 

VOLTAGE WARNING

: Before connecting this vacuum to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same

as that specified on the nameplate. A power source with voltage greater than the specified voltage on nameplate can result in SERIOUS
INJURY to the user - as well as damage to the motor.  If in doubt DO NOT PLUG IN THE VACUUM. Using a power source with voltage
less than the nameplate is also harmful to the motor.

1. KNOW YOUR VACUUM. Read and understand the

owners   manual and labels affixed to the vacuum.
Learn its application and limitations as well as its
specific potential hazards. 

2. GROUND THE VACUUM. THIS VACUUM MUST BE

GROUNDED. This vacuum is equipped with an
approved 3-conductor cord and a  3-prong grounding
type plug to fit the proper grounding type receptacle.
The green conductor in the cord is the grounding
wire. NEVER connect the green wire to a live terminal.
See grounding instructions.

3. WEAR PROPER APPAREL. Do not wear loose

clothing, gloves, neckties or jewelry (rings, watch)
because suction force could get them caught in the
vacuum. Wear protective hair covering to contain
long hair. Roll up long sleeves above the elbows.

4. Do NOT expose to rain, this vacuum must be stored

indoors.

5. Do not handle the electrical plug or vacuum with wet

hands.

6. Never use this vacuum with any opening blocked,

keep opening free of dust, hair, lint or anything that
will restrict air flow.

7. Never vacuum anything that is on fire, burning or

smoking such as matches, cigarettes or hot ashes.
Never vacuum flammable or combustible liquids such
as gasoline, electrical devices could produce sparks
which can cause a fire or explosion! Never vacuum
toxic or hazardous materials.

8. Never use this vacuum without filters installed.
9. Never vacuum coal ash, cement or drywall dust

without a re-usable filter or dust bag in place or you
could damage the motor or the material could be
exhausted back into the air. To prevent serious motor
damage, vacuuming drywall dust is not
recommended because drywall dust requires a high
efficiency drywall filter and dust bag which are not
available for this vacuum. 

IMPORTANT SAFETY RULES FOR WET•DRY VACUUMS

Содержание 8510LP







Отзывы: