King Canada 8225NL Скачать руководство пользователя страница 8

Страница: 8 / 9

OPERATING YOUR NAILER

WARNING! protect your eyes and ears. Wear Z87 safety glasses with side shields. Wear hearing

protection. Employers are responsible for ensuring the user or anyone near the nailer wears the

above mentioned safety protection.

WARNING! Check and replace any damaged or worn components.

• Add one/two drops of 30W oil for air tools into the air inlet.

• Install a quick connect fitting to the nailer (if not installed).

• Connect the nailer to an air compressor using a 3/8” I.D. hose. Make sure the magazine does not contain

any nails and that the air hose has a rated working pressure exceeding 200 PSI and a female quick

coupler.

• Regulate the air pressure to obtain 85 PSI. Check the operation of the contact safety trip mechanism

following the instructions in this manual.

• Load magazine with nails following the instructions in this manual.

• Reconnect the air hose to the nailer air inlet.

• Test for proper nail penetration by driving nails into scrap wood. If the nails do not achieve the desired

penetration, regulate the air pressure to a higher setting until the desired penetration is achieved. Do

not exceed 120 PSI.

Содержание 8225NL








