Revised 9.3.19
Installation Instructions:
(Part # 17050101 RTG)
2007-2018 Jeep JK Heavy Duty Tire Carrier Kit
Stainless Steel Finish
– Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap, window or glass cleaner may be used to clean the finish.
Dual state powder coat finish
–
Mild soap, window or glass cleaner may be used to clean the finish. In order to protect the finish, you
may wax your product on a regular basis with pure carnauba automotive wax. Do not use any types of
soap, polish or was that contains abrasive that could damage the finish.
Textured coated finishes
should
be cleaned with a mild soap on a damp sponge. Do not apply polish or was that requires to be removed
by means of buffing. This type of wax is commonly used at car wash facilities
. Chrome Finish
– Mild
soap, window or glass cleaner may be used to clean the finish. In order to protect the finish you should
wax your product on a regular basis with pure carnauba automotive wax. Do not use any types of soap,
polish or was that contains abrasive that could damage the finish.
Limited Warranties
King 4WD’s products are covered under the following limited warranties only. Note that the
duration of the limited warranty differs according to the material and finish of the product
purchased. Subject to the duration and conditions of the limited warranty stated below, King
4WD’s warrants to the original retail purchaser that its products are free from defects in material
and workmanship. All other warranties and representations express or implied, are hereby
disclaimed, including fitness for merchantability and buyer’s intended use or purpose. All parts
are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to
the selection, suitability and performance of all goods and products selected. This limited
warranty does not cover damage or impairment in any part due to misuse, improper installation,
accident or contact with on-road or off-road hazards, product modification, improper or
inadequate cleaning and/or maintenance. King 4WD’s is not responsible for items damaged
during shipping. This warranty is not transferable from the original buyer. For the original
Buyer to be eligible for the limited warranty coverage, the Buyer must provide proof of
purchase. King 4WD’s strongly recommends returning the warranty registration card.
Customer’s remedy hereunder shall be limited only to repair or replacement (at King 4WD’s
option) of any defective part(s) returned to King 4WD’s at customer’s expense. The
determination of whether or not a returned part is defective or subject to coverage under the
limited warranties stated herein shall be made at King 4WD’s sole discretion.
To assure product quality, King 4WD’s reserves the right to change product design, material,
specification and finishes without prior notice to customers. This limited warranty gives you
specific legal rights and you may also have other rights, which may vary from state to state.
Some states do not allow limitations on how long an implied warranty lasts, so the above
