Kinetik BPX1A, Руководство пользователя

Страница: 13 / 26

Using your Blood Pressure Monitor
Memory
The memory can store 90 sets of measurements and these results will be automatically stored
after each reading.
To check the memory, press the MEM button (either just after a measurement has been taken
or while the unit is off). Press the MEM button to scroll up or the SET button to scroll down
through the individual memories.
Note that the most recent measurement is always stored in memory slot 1. Once all 90
memory slots are filled, the oldest memory will be erased during the next measurement to
make room for the latest memory.
Deleting the Memory
With the unit off, press the MEM button to switch the unit on then press and hold the SET
button for 4 seconds. Press the SET button again to alternate between ‘DEL NO’ and ‘DEL
YES’. Confirm by pressing the START/STOP button.
The above procedure will delete the entire memory bank, not just a single measurement.
Once deleted, the memory cannot be recovered.
12