5280 Main Street NE Minneapolis, MN 55421
1.877.226.7824 |
www.kurtkinetic.com
User Manual
T-2600 | KINETIC Z•ROLLERS
SET UP
UNFOLD THE UNIT
1.
Lift topmost frame section
2.
Straighten the top and middle frame
sections making sure that the band is in the
drum groove on both rollers
3.
Set top and middle sections down on the
floor and the Z•Rollers are ready.
Thank you for purchasing Kinetic Z•Rollers!
Choosing Kinetic Z•Rollers places you in an elite group of discerning cyclists who demand the best of both their equipment
and themselves. Riding rollers will improve balance, pedaling technique, and overall form on the bike. Rollers are not for
everyone, only for riders who already posses a substantial measure of skill. You are already good, these will make you
better.
Z•Rollers are designed to meet the needs of elite-level cyclists. If properly cared for they will give you years of
trouble-free service. Z•Rollers are backed by Kinetic’s Unconditional Lifetime Warranty.
Z•Rollers come completely assembled. Just unfold the frame, adjust the drums to your bike’s
wheelbase (if necessary), and ride.
BIKE POSITIONING
CHECK WHEELBASE ON DRUMS
1.
When bike is set on rollers, the front axle
should be slightlty behind the axle bolts on
the front drum of the Z•Rollers.
2.
If the front drum position is not as shown,
fold top and middle frame sections to release
band tension and unscrew both knobs
together and reposition the drum to the next
closest position.
The front-wheel axle should position slightly
behind the Z•Roller drum axle.
[EN]
