Page 5
MOUNTING THE BIKE
1. Remove thumb controller from
handlebar
2. Loosen the adjustment knob
on the resistance unit to back
the roller away from the tire
until it no longer touches.
3. Reduce axle tension by
loosening the right axle knob
a minimum of two turns to
allow for disengagement of
the quick release.
4. Firmly grasp your bike seat
stay to stabilize the bike.
5. Disengage the quick release
on the right side of the trainer
and slide the axle knob to the
fully open position. The bike
can now be removed from the
left cone cup.
REMOVING
THE BIKE
Tighten right
tensioning knob on
quick release side of
trainer until wheel
is firmly centered
on resistance unit
roller
Tighten lock
ring when wheel
is centered on
resistance unit and
bike is firmly locked
in at the skewer
3
TENSION KNOB
SHIM PADS
SHIM PADS
Attach thumb
controller to
handlebar using
proper rubber shim
pad, tighten tension
knob
6
4
RIGHT
SIDE
LEFT SIDE
www.kurtkinetic.com
Turn roller tension
knob until roller
touches tire, then
add 2 to 5 full turns
5
TIP:
Test tire
friction by sharply
moving tire a
1/4 turn back
and forth. apply
another 1/2 turn
on adjustment
knob if needed.
