10
Instruction manual
_TeachPoint
3
Single
Warning!
Possibly dangerous situation!
Failure to observe this warning may result in serious bodily injury.
1. Basic safety instructions
• Please read these instructions carefully and keep them.
• The installation of electrical media devices and the connection of the mains connections may only be carried out by qualified
and instructed personnel.
• Before any drilling work, please make sure whether and where concealed lines are located in the drilling area.
Power lines must not be exposed to the risk of damage.
• The mains connection must be connected to an earthed socket. The total power consumption of all connected loads must not
exceed 2500 W.
• Have damaged power cables replaced immediately to avoid danger to users.
• The TeachPoint³Single may only be operated in closed and dry rooms. Do not expose this device to dripping or splashing water.
• Always choose a level, stable surface. The desk must be perpendicular.
• Lay the cables to the device so that they do not pose a trip hazard and cannot be damaged.
• Caution! Danger of crushing by moving lift!
Risk of crushing
Warning
with lift in motion
> do not bring limbs into the
working area of the lift
• Do not place any objects in the travel path of the lift.
• Ensure that safety stickers are not covered and are always clearly legible.
• As a matter of principle, no safety devices may be permanently dismantled or put out of operation.
• This will invalidate any warranty claim!
• When working on the TeachPoint³Single, the power supply must be disconnected (pull out the mains plug).
• The ventilation opening must not be covered or obstructed.
• Pull the mains plug out of the socket! Improper installation or maintenance work may result in
can cause considerable danger to the user!
Only devices that are ready to plug into a 230V socket may be installed.
2.1 General description and intended use
The TeachPoint³Single is a multifunctional lecturer‘s desk which can be easily adapted to all conditions by means of electrical
height adjustment.
Displays up to a maximum size of 70 x 40 x 7 cm (WxDxH) can be installed under the movable desk top. An ergonomic display
holder is available for this purpose. This can be adjusted to the optimum angle position between 0 and 45° with the help of an
integrated gas pressure spring and a pushbutton. It has the VESA standard 75x75, 100x100 and 200x100 mm.
Two cable passages allow clearly defined cable routing from the display to the interior.
Thanks to its lockable base cabinet, it offers plenty of space for media technology installations, but also sufficient storage space
for other useful items. The roller-mounted pull-out (standard) offers increased access convenience and conceals the integrated
technology. As standard, the desk is equipped ex works with pre-installed 19“ rails (6 U).
Two laterally arranged revision accesses allow convenient access to the technology.
The console offers the options for integrating connection panels and media controls.
Other extensive options such as logo and nameplate holders, microphone mounts, console surface light, 19“ rack 9U,
additional add-on module, as well as country-specific versions are available.
EN
