Kindermann QuickSelect 3.0+, Инструкция по установке и эксплуатации

Страница: 30 / 36

30
VGA to HDMI converter:
The integrated VGA to HDMI Scaler converts analogue video and audio signals into
an HDMI signal.
To achieve the highest possible quality from the VGA source signal,
the resolution of the video signal fed-in via VGA can be adjusted on
the output side. On the left, for all devices that were found under
‚Auto Detect‘; on the right only for the selected device (framed red).
For best image quality, the native (physical) resolution of the output
device should be set.
If this value is set to Auto, the following assignments are used:
Pre-set resolution assignment between VGA in- and output
Common VGA formats VGA special formats
Input resolution Output resolution Input resolution Output resolution
1024x768 1024x768 832x624 (MAC) 1920x1080P
1280x720 1280x720 1152x864 (MAC) 1920x1080P
1280x800 1280x800 1152x870 (MAC) 1920x1080P
1280x1024 1280x1024
1360x768 1360x768
1366x768 1366x768
1400x1050 1400x1050
1400x900 1400x900
1600x900 1600x900
1600x1200 1600x1200
1680x1050 1680x1050
1920x1080P 1920x1080P
1920x1200 1920x1200
1920x1080P Epson* 1920x1080P
1920x1200 Epson* 1920x1200
Note: The resolutions marked with an asterisk (*) include timing parameters that differ from typical video
timing standards and are used in rare cases by Epson and other device manufacturers. These timings can
be used alternatively if the standard timings above to not lead to optimal results.