KinderBike Laufrad, Руководство пользователя

Страница: 9 / 16

WARNING: To prevent damage to the seat tube
and possible loss of control by the rider, the
minimum insertion mark on the seat post must
be below the top of the seat tube and should not
be noticeable when riding.
WARNING: If the clamping force of the seat
lever is too weak, the seat post can loosen while
riding, possibly causing injury to the rider
CAUTION: Operate the Quick-release Lever by
hand only. Do not use a hammer or other tool to
tighten the quick-release lever.
4 . INSTALLATION OF THE REFLECTOR
•
Install the reflector (J) onto the front fork as shown
•
Ensure the reflector is upright and facing forward
•
Tighten reflector bolt hardware using Philips screwdriver. Reflector
should not move when bicycle is in motion
5. LINEAR-PULL BRAKES
The Laufrad/Mini Balance Trainer may be equipped with a rear linear-pull brake
that is operated by depressing a handlebar brake lever. Prior to bike usage, the
brake system needs to be properly tuned and aligned. KinderBike recommends
all brake tuning and alignment be performed by a qualified bicycle technician.
If you are unsure of the brake system's proper adjustment and operation,
please seek the assistance of a qualified bicycle technician.
9