BEFORE YOU START
Assembly Instructions
IMPORTANT! KEEP FOR FUTURE REFERENCE:
READ CAREFULLY.
This Kinder Valley cot bed conforms to BS EN716:2008+A1:2013 and the child’s bed conforms to
BS 8509:2008+A1:2011.
This Kinder Valley cot bed is suitable from birth. In cot mode there are 3 mattress base positions. The lowest
position is the safest and should always be used as soon as the baby is able to sit up.
When the cot bed is converted into bed mode, the minimum age should not be less than 18 months and no
more than 4 years old.
To prevent injury from falls, when the child is able to climb out of the cot, the cot should be converted into a
bed.
Thickness of the mattress shall be such that the internal height (surface of the mattress to the upper edge of
the cot frame) is at least 500 mm in the lowest position of the cot base and at least 200 mm in the highest
position of the cot base.
WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires,
gas fires, etc. in the near vicinity of the cot.
WARNING: Do not use this cot bed if any part is broken, torn or missing and use only spare parts
approved by Kinder Valley.
WARNING: Do not use more than one mattress.
WARNING: All assembly
fittings should be checked regularly and retightened as necessary
. Loose fittings can
result in snagging clothes or cords posing a risk of strangulation.
Warning: Do not leave anything in the cot or place the cot close to another product, which could provide a
foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords etc.
�
Assembly fittings should always be tightened properly and care should always be taken that no screws are
loose to ensure your child does not trap parts of the body or clothing. Do not over tighten.
�
We recommend you use any Kinder Valley mattress size 140cm x 70cm. The length and width shall be such
that the gap between the mattress and the sides and ends does not exceed 30 mm.
�
Use only on firm ground which is on a horizontal level and dry.
�
This cot bed is designed to be dismantled and packed flat for storage or transportation.
�
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed
too close to other furniture or windows, blind cords, curtain pulls or other strings or cords and should be
placed either tight to any wall or have a gap of 30cm between the wall and the side of the bed.
�
In order to clean, use only a mild detergent and warm water. Do not bleach or use any abrasive substances.
Missing parts
Please check that you have all parts before If you are missing any fixtures and fittings for your product please
contact our customer service team on:
0844 7744644 and they will be happy to arrange a replacement to be sent to you free of charge.
This Kinder Valley Cot is guaranteed for 12 months from the date of purchase; (please retain your receipt as
proof of purchase) If you encounter any problems, you can email us at: [email protected].
www.kinder-valley.com
KINDER VALLEY COT BED
WARNING. Do not place this child’s bed near heat sources, windows and other furniture.
WARNING. Do not use this child’s bed if any part is broken, torn or missing.
Number of people to assemble:
Two adults are required to assemble this item.
Time to assemble:
1 hour.
Tools required:
(Included)
