kincrome KP87002, Руководство пользователя, Страница: 7 / 10

7
SMART 8 STAGE BATTERY CHARGER &
MAINTAINER 12V 1.5 AMP
1. Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (Not required on sealed & maintenance
free batteries).
If necessary, remove the vent caps and add distilled water so the levels are halfway
between the upper and lower fill lines.
•
Check the battery Voltage, type and Ah capacity to ensure the charger is compatible.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from
the battery as the cables permit.
RED BLACK
RED BLACK
CONNECTION IN VEHICLE
(
NEGATIVELY EARTHED
)
RED BLACK
CONNECTION IN VEHICLE
(
POSITIVELY EARTHED
)
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
RED BLACK
RED BLACK
CONNECTION IN VEHICLE
(
NEGATIVELY EARTHED
)
RED
BLACK
CONNECTION IN VEHICLE
(
POSITIVELY EARTHED
)
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
RED BLACK
RED BLACK
CONNECTION IN VEHICLE
(
NEGATIVELY EARTHED
)
RED
BLACK
CONNECTION IN VEHICLE
(
POSITIVELY EARTHED
)
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
KP87002
100% AUTOMATIC
Designed for all conventional
lead acid sealed (AGM, GEL & WET)
batteries
Power
Fault
Charging
Rejuvenation
(Reconditioning)
Full/Float
Smart 8-Stage
Battery Charger
& Maintainer
12 VOLT
DC OUTPUT
1.5 AMP CHARGE RATE
OPERATION CHARGING INSTRUCTIONS:
SEE QR CODE FOR
QUICK START PRODUCT VIDEO
2. Connecting the battery charger to your battery
If the Battery is out of the vehicle:
•
Connect the RED (+) Crocodile clip or ring terminal to the
positive (+) battery terminal.
Connect the BLACK (-) Crocodile clip or ring terminal to the
negative (-) battery terminal.
•
If the battery is still in the vehicle , determine if the vehicle
is positively or negatively earthed (Fig 1).
If Negatively Earthed (Most Common)
•
FIRST Connect the RED (+) Crocodile clip or ring terminal
lead to the positive (+) battery terminal and then connect
the BLACK (-) Crocodile clip or ring terminal lead to the
vehicle’s chassis (Fig 2).
WARNING: DO NOT connect the BLACK (-) lead to the
carburettor or fuel lines.
If Positively Earthed
•
FIRST Connect the Black (-) Crocodile clip or ring terminal
lead to the negative (-) battery terminal and then connect
the Red (+) Crocodile clip or ring terminal lead to the
vehicle’s chassis (Fig 3).
WARNING: DO NOT connect the RED (+) lead to the
carburettor or fuel lines.
Fig. 1
Fig. 2
Fig. 3
KP87002 OzCharge Manual.indd 7 5/03/2018 2:25 PM