kincrome KP704, Руководство пользователя

Страница: 11 / 12

10
50L WET & DRY WORKSHOP VAC
IMPORTANT!
If the vacuum cleaner still fails to operate correctly after you have carried out the above operations, or in the event of anomalies
other than those described above, contact Kincrome Customer Service on 1300 657 528 for assistance.
Spare Parts
• For a full list of available spare parts for this item visit the Kincrome website kincrome.com.au for reference.
• Type in the part number and then click on the documentation tab for a copy of the parts diagram and listing.
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria
(Tel 1300 657 528). The applicable warranty period (12 months) commences on the date that the product is
purchased. If this product has materials or workmanship defects (other than defects caused by abnormal or
non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome
service agent or one of Kincromes addresses for repair or replacement. Your rights under this warranty are in
addition to any other rights you have under the Australian Consumer Law or other applicable laws. Our goods
come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further details
please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture, the product you purchase may
sometimes differ from the one shown on the packaging.
PROBLEM CAUSES SOLUTIONS
The Vacuum cleaner does not
vacuum efficiently
Vacuum tank full
Empty the Vacuum tank (14)
Dirty / Clogged filter
Clean the cloth filter (20) or 3 Micron Filter
Cartridge (23) as described in Maintenance
of your Vacuum. (Empty or replace filter
bags if applicable to your vacuum model)
The Vacuum safety float valve (19)
has intervened due to the tank being
full of a liquid.
Empty the Vacuum tank (14)
Check that the vacuum hose (2),
floor tools (10) or (24), extension
wands (13) are not blocked
Ensure that the hose is not blocked by
removing the hose assembly and inserting
a broom handle through the hose to clear
any obstructions. Do not force the broom
handle to clear obstructions.
Vacuum motor head (4) not
assembled correctly
Reassemble the vacuum motor
head (4) checking that it fits
well onto the vacuum tank (14) and secure
it in place with tank retention clips (16).
9) Troubleshooting (Cont.)