kincrome KP703, Руководство пользователя, Страница: 6 / 12

5
30L WET & DRY GARAGE VAC
Wet & Dry Garage Vac User Instructions (cont.)
3b) Installation of the Dry Filters - Cloth (15) & 3 Micron Filter
Cartridge (19)
1. Remove the motor head (3) from the vacuum tank (5) by releasing the tank retention clips (4) on
the side of the vacuum.
2. Locate the Cloth filter (18) onto the upper top ring of vacuum tank (5) (fig 5a). Once located
ensure that the filter is pressed onto the vacuum tank (5) so the motor head (3) can be installed
correctly.
3. Locate the 3 Micron Filter Cartridge (19) over the Safety float valve basket (17) (fig 5b). Once
located ensure that the 3 Micron Filter Cartridge (19) is pressed over filter locating rings at the
base of the safety float valve basket (17) (fig 5c).
4. Once you have installed the 3 Micron Filter Cartridge (19) replace the motor head (3) back onto of
the vacuum tank (5), then locate and secure the tank retention clips (4) onto the motor head (3).
3d) Installation of the Filter - Foam (17)
1. Remove the motor head (3) from the vacuum tank (5) by releasing the tank retention clips (4) on
the side of the vacuum.
2. Remove the cloth filter (18) and 3 Micron Filter Cartridge (19) if fitted.
3. Slide the foam filter (20) over the safety float valve basket (19) (fig 5d) until the filter is located
over the filter locating rings on the underside of the motor head (3) (fig 5e).
4. Once you have installed the Foam filter (20) replace the motor head (3) back onto the vacuum
tank (5), then locate and secure the tank retention clips (4) onto the motor head (3).
Note: DO NOT use the foam filter (20) in conjunction with any other filters. The foam filter is designed for use when
vacuuming liquids only and does not have a high rate of dust & debris filtration. Using only the foam filter (20)
for dry vacuuming can allow dust and debris to enter the vacuum motor head (3) causing premeture failure
of the vacuum.
Premature failure of the vacuum due to using the incorrect vacuum filter types is not covered
under warranty.
WARNING! This vacuum cleaner is NOT designed to be used as a water
transferring device. The vacuum is intended to clean up general spills in & around
the home or garage.
DO NOT submerge the vacuum pipes or hoses directly into water when vacuuming
(fig 5a)
(fig 5b)
(fig 5c)
(fig 5d
(fig 5e)