4
750
MM
I
NDUSTRIAL PEDESTAL DRUM FAN
5) Icons on Product
The following symbols are shown on the tool:
The Floor Fan is intended for indoor use only.
Read the instruction manual before use.
Warning
Electromagnetic compliance (C-Tick)
6) Unpacking
Unpack all the components from the box.
When unpacking the KP1013 750mm Industrial Pedestal Drum Fan, carefully inspect for any damage that may have occurred
during transit.
Check for loose parts, missing parts or damaged parts.
1. Ensure all packaging materials are disposed of as per your local council guide lines.
7) Assembling the Anti-Trip Base to the Telescopic Stand
Note: Raise the telescopic stand (10) prior to assembly by rotating the telescopic height
locking
kno
b
(9) anti-clockwise, then
extend the pedestal shaft. Re-tighten the telescopic height
locking
knob (9) by rotating clockwise to lock the
pedestal shaft
position of the telescopic
p
edestal stand (10).
1.
Place the anti-trip base (11) on the floor, with the screws facing upwards (Fig.1a)
,
and remove the 5 screws located
on the top of the anti-trip base (11) with a phillips head screw driver (not provided) (Fig.1b).
2.
Once removed, insert the large coil spring (12) provided and feed it into the bottom of the telescopic
stand (10) (Fig.1c).
3.
With the large coil spring (12) inside the telescopic pedestal stand (10), lower the telescopic pedestal stand (10) onto
the anti-trip base (11) aligning the telescopic pedestal stand (10) collar with the 5 screws you removed in step 1. Once
alligned reinstall the 5 screws to secure the telescopic stand (10) to the anti-trip base (11) (Fig.1d).
(Fig.1a)
(Fig.1b)
(Fig.1c)
(Fig.1d)
Содержание KP1013
Страница 8: ...www kincrome com au...
