kincrome K16130, Руководство пользователя

Страница: 29 / 31

28
Appendix A –Broadcast Spray Calibration Tables
Below are some guidelines to help you calibrate your tow behind broadcast sprayer. This is a very important step in
operating the tow behind broadcast sprayer such that too much or too little chemical may be applied.
1. Using Table 1, find a table that corresponds with the chemical manufacturer's suggested application rate (litres
per hectare, litres per 1000 sq. m.)
2. Find the application rate that is closest to the chemical manufacturer's recommendations.
3. The speed to drive your ATV is listed below the application rates.
TABLE 1
SPRAY
HEIGHT
PRESSURE
(kPa)
LITRES PER HECTARE – based on water at 51cm spacing
3.2 KPH 4.8 KPH 6.4 KPH 8.0 KPH 9.7 KPH
51cm 207 486 325 243 195 162
51cm 276 556 370 278 223 185
51cm 345 625 417 312 250 209
SPRAY
HEIGHT
PRESSURE
(kPa)
LITRES PER 1000 SQ. M. – based on water at 51cm spacing
3.2 KPH 4.8 KPH 6.4 KPH 8.0 KPH 9.7 KPH
51cm 207 48.6 32.5 24.3 19.5 16.2
51cm 276 55.6 37.0 27.8 22.3 18.5
51cm 345 62.5 41.7 31.2 25.0 20.9
* Approximate flow from one nozzle
4. Use Table 2 to choose the throttle setting on your ATV.
Speed
Time required in seconds to travel a distance of:
(KM/H) 10 m. 50 m. 100 m.
1 36 180 360
3 12 60 120
5 7 35 70
7 5 25 50
9 4 20 40
12 3 15 30
16 2 11 22
TABLE 2
5. The coverage area can be found by dividing tank size by the application rate.
Example: 155 litres divided by 209 litres/hectare = 0.74 hectare of coverage per tank.