GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electric current and reduces the risk of electric shock. This tool is equipped
with an electric cord that has an equipment grounding conductor and a grounding plug. The
plug MUST be plugged into a matching outlet that is properly installed and grounded in
accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PLUG. If the plug will not fit the power supply outlet, have the proper
power supply outlet installed by a licenced electrician.
IMPROPER CONNECTION of the equipment grounding conductor can result in electric
shock. The conductor with the green insulation (with or without yellow stripes) is the equipment
grounding conductor. If repair or replacement of the electric cord or plug is necessary,
DO NOT connect the equipment grounding conductor to a live terminal.
CHECK with a licenced electrician or service personnel if you do not completely understand
the grounding instructions, or if you are not sure if the tool is properly grounded.
USE ONLY THREE-WIRE EXTENSION CORDS that
have 3-prong plugs and 3-prong outlets that accept the
tool's plug as shown in Fig. A. Repair or replace a
damaged or worn cord immediately.
CAUTION: In all cases, make certain the power supply outlet in question is properly
grounded. If you are not sure, have a licenced electrician check the power supply
outlet.
SAVE THESE SAFETY RULES
WARNING:
THIS BENCH DRILL PRESS IS FOR INDOOR USE ONLY. DO NOT
EXPOSE TO RAIN OR USE IN DAMP LOCATIONS.
IV. Electrical information
6
1
3
2
1 - 3-prong plug
2 - Properly grounded outlet
3 - Grounding prong
Fig. A
