3
RANGER 12V AIR COMPRESSOR
4) Power Tool Use And Care
a) Do not use the 12V Air Compressor if the switch does not turn it on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
b) Disconnect the 12V Air Compressor from the power source before making any adjustments, changing accessories, or
storing.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
c) Store idle 12V Air Compressor out of the reach of children and do not allow persons unfamiliar with the Compressor or
these instructions to operate the Compressor.
Air Compressors can be dangerous in the hands of untrained users.
d) Maintain 12V Air Compressor. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the Air Compressors operation.
If damaged, have the Compressor repaired before use. Many
accidents are caused by poorly maintained tools and equipment.
e) Use the 12V Air Compressor, accessories and tool bits etc., in accordance with these instructions taking into account the
working conditions and the work to be performed.
Use of the Air Compressor for operations different from those intended
could result in a hazardous situation.
f) The electric motor has been designed for 12VDC.
Always check that the power supply corresponds to the voltage on the
rating label.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that
the safety of the 12V Air Compressor is maintained.
6) Additional Safety Instructions for Air Compressors
a) When using the compressor,
ensure you are parked in a safe, well lit location, off the road and with the handbrake engaged.
b) Ensure your personal safety is not at risk and NEVER use the compressor while the car is in motion.
c) Do not place the hose end against any part of the body when turned on,
as this may infuse air into your blood stream
putting your health at serious risk.
d) Do NOT make any alterations to this compressor.
Only use the adaptors supplied with this product.
e) Use this product only in accordance with operation instructions included in this manual.
f) If the vehicle fuse is blown, only replace with identical rated fuse.
g) Inspect each part before use. Do NOT use if bent, broken, melted burnt or if the unit appears to be damaged.
h) Check the tyre pressure before inflating. Never exceed the suggested pressure of the item being inflated. If suggested
pressure is exceeded, the item being inflated may burst.
i) Do NOT bend or pinch the air hose while the compressor is in use.
j) It is NOT suggested that the compressor work continuously for more then 15 minutes at a time. If 15 minutes of use has
been reached, turn it off and let it cool for 30 minutes before using again.
k) If the compressor is making abnormal sounds or its temperature is quite high, turn OFF the power straight away and let
it cool for atleast 10 minutes before trying again. Improper use may result in damage of the compressor.
l) Do NOT leave the compressor unattended and operating. Keep out of reach of children.
m) Put the compressor in a dry place if it is not in use for an extended period of time.
n) Keep the compressor away from flammable liquids or gas. Do NOT allow the compressor to become wet.
o) Never put the connector and adaptors into your mouth, ear or eye. They are NOT toys.
p) The compressor will become hot with use. The air hose inlet will also become hot with normal use. Take care NOT to
touch these for approximately 10 minutes after use to allow both to cool.
7) Electrical Safety
WARNING! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce
risk of fire, electric shock, personal injury and material damage.
a) Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating
the tool.
b) Save these instructions and other documents supplied with this tool for future reference.
c) The electric motor has been designed for 12V only. Always check that the power supply corresponds to the voltage on the
rating plate.
d) If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
3
Содержание K13012
Страница 12: ...www kincrome com au...
