NOTE
:
1. Tap the battery indicator button to indicate the remaining battery capacity and automatically turn off after
5 seconds. 2. When charging, 4 LED Lights blink in sequence, and the LED lights are completely off after being fully
charged.
Charging Indicator
Installing and Removing the Battery Pack From the Tool
WARNING:
Make certain the lock-off buttom is engaged to prevent switch actuation before removing or
installing battery.
1. 20V Battery Pack 2. Tool-Battery Connection 3. Battery Slide Button
To install battery pack:
Insert battery pack(1) into tool(2) until an audible click is heard as shown in
picture. Make sure battery pack is fully seated and fully latched into position.
To remove battery pack:
Depress the battery slide button(3) as shown in picture and pull battery pack
out of tool.
