Kimin TV Link Loader, Руководство пользователя, Страница: 16 / 21

<Caution>
9
UART communication is impossible in Standby mode.
9
Debug mode is not communication with TV but communication with
terminal of PC.
9
Standby mode execution condition
9
Do confirmation possibility as "Standby" on LCD screen.
9
Enter by Standby mode after 30 seconds since Power On.
9
If click any button in Stand by mode, get into Ready state.
9
At this point, is entered by Standby mode by automatic after 20
seconds if do not any use.
9
Therefore, while put out power supply when was Standby mode
turn on or desire to come by debug mode in 20 drafts after click
Receive key once.
9
Desire to observe as is entered in Stand by state if there is no
transmission for 1 minute after come by debug mode.
Debug Mode
8