Page
22
de
22
Battery installation
•
Remove the battery cover on the back of the remote control and insert two
AAA (1.5V) batteries. Make sure that the polarity matches the + and - marks
on the battery compartment of the remote control.
•
Do not use different types of batteries. Never mix new and old batteries.
Always replace batteries in pairs.
•
Do not burn, charge or disassemble batteries.
Never dispose of used batteries with household waste but in the recycling
bins provided for this purpose, e.g. in your supermarkets or in accordance
with local environmental regulations.
Precautions for using the remote control
•
Aim at the infrared receiver located below the right corner of the screen.
Do not place any objects between the remote control and the receiver to
avoid interference and to ensure normal operation.
•
Keep the remote control away from strong vibrations. Do not place the
remote control under direct sunlight or on a radiator, as this may deform
and damage it.
•
The remote control signal may not work if the infrared receiver is exposed
to sunlight or strong lighting. In this case, adjust the angle of the lighting on
the device or move closer to the receiver.
•
The maximum operating distance of the remote control is 5 m, which can
be shortened if the battery charge is insufficient, in which case replace the
batteries with new ones. If the remote control is not used for a long period
of time, remove the batteries to prevent corrosion that could damage the
remote control.
A
Bluetooth Mouse
can be installed.
Please note : You will still need the remote control to turn your device on and off and to
access the machine settings on the screen.
This manual provides information for reference purposes only and is not a contractual document, as products are
subject to change without notice. If there are any differences between the product and this manual, please
contact your dealer or KIMEX International Technical Support.
REMOTE CONTROL
INSTALLING THE BLUETOOTH MOUSE
Configuration and setting
