Kimex 049-3W Series, Руководство по установке

Страница: 18 / 28

3
Install the screen in a position visible to all viewers; ideally, the screen should be
mounted in the middle and in line with viewers.
The bottom third of the screen should be approximately at the viewer's eye level.
Install the screen upright and stable, otherwise you may roll up and unroll the
screen fabric at an angle. With this screen you have the possibility to choose
between four mounting variants. We recommend that you lower the canvas
between 80 and 120cm from the ground.
As a general rule, the mounting brackets should ideally be installed between 200
and 300 mm at both ends of the screen (see image 1).
1. Please use the plastic dowels for assembly ona brick or
solid concrete wall. Determine the position of the fixing
brackets according to the dimensions of the crankcase and
the height of the screen fabric. Draw a horizontal line
(bubble level) to install both mounting brackets at the
same height. Use the brackets as a template and mark the
holes on the
Before starting to install the screen with the chosen assembly, the
fixing brackets must be adjusted to its basic position: To do this,
turn the lower safety screw of the bracket anti-clockwise. -
clockwise so that the square opens. Do not loosen the screw
completely, only until the arm opens.
Screen installation
Electrical specifications
200-300
200-300
Image 1
Tension: 230V, 50Hz
Consumption: 130W (MAX)
0,4 Watt (Standby)
Brown-Live (Up)
Black-Live (down)
Blue-Neutral
Yellow/Green Earth
Wall mounting
WARNING ! Be sure to use a load-bearing or sufficiently strong wall
.