Utili
z
ation
P
iloting with the
wall
box
(Fig.1)
Connect the plug to a wall socket (make sure the voltage is correct).
The cable should not be laid on white surfaces or stretched. When
using an extension cord, be sure to observe the correct voltage. The
box must be fixed with the cable outlet on the bottom.
Unroll the canvas
(Fig.2)
Press the button with an arrow pointing down. The fabric unwinds
and will automatically stop at the lower stop point.
Roll up the canvas
(Fig.3)
Press the button with an arrow pointing up. The fabric will roll up
and stop automatically at the upper stop point.
Sto
p the canvas' course
Press the button with an arrow pointing up. The fabric will roll up
and stop automatically at the upper stop point.
Control from the remote control
(
radio frequency
) (Fig.4)
Unroll the canvas
Press the lower button and the canvas unrolls to the lower stop
point.
Roll up the canvas
Press the lower button and the canvas unrolls to the lower stop
point.
Stop
the canvas
Press the middle button and the canvas stops its course.
4
Lower limit
— Adjust the stopping level of
slat
when
fully extend. Turn
”lower limit” switch in clockwise direction
let the slat go closer to the ground.
Upper limit
— Adjust the stopping level of slat when fully
retract. Turn
”upper limit” switch in clockwise direction let the
slat go
closer to the casing.
