Document:
Onvation Hub Manual
Manufacturer:
Kimberly-Clark Global Sales, LLC (Kimberly-Clark Corporation)
Date:
2019-01-21
I.
Intended Use and Installation
This device is intended to be used as a wireless gateway that monitors remote external sensors and
relays data to a remote server. It is intended to be installed in public washrooms.
It contains some of the following features:
2.4GHz wireless technology
LTE, UMTS, and GSM technology
Power-over-Ethernet (PoE)
Audio speaker and microphone
Thermal pixel array imaging system
II.
Radios
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved Kimberly Clark could void the user’s authority to
operate the equipment.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
The radio module may only be combined with other radios in a host when following current FCC
guidance for integration of multiple radios.
The module is for integration with host products of the grantee of the module only. It must be
integrated in a way maintaining a separation distance between the antenna in the module to all metallic
housings or other PCBs of at least 1 cm
This device complies with Industry Canada license-exempt RSS 210. Operation is subject to the following
two conditions: (1) this device may not cause interference and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
