How to Care for your New Kimberley
Waste Bin
1.
Please make sure you thoroughly read and under-
stand the installation instructions and follow them
carefully.
2.
For best results and longevity, always use a bin liner
inside your waste bin.
3.
Always make sure the liner is installed without
obstructing any of the waste bins moving parts.
4.
Do not overload your waste bin.
5.
Do not push the rubbish down to try to compact your
waste.
6.
Do not place heavy items on top of the bin lid. There
is a Wire Basket (KWB01) available to suit Waste Bin
Models: KRB06, KRB06D, KRB08, KRB14, KRB14D,
KRB15 & KRB15D.
7.
Never try to close your waste bin with your feet.
8.
Never force the waste bin closed.
9.
Use a soft cloth and warm mild soapy water to regularly
clean the interior and exterior of the waste bin. Do not
use harsh detergents.
10.
When washing the waste bin, use a soft cloth to dry
the waste bin.
11.
Be careful to thoroughly dry any areas of metal to
avoid rust and damage.
12.
Do not use the bin outside or expose it to the
weather.
13.
Do not place waste bin near a heater or hot device.
Kimberley Products Pty Ltd
ABN 34 004 518 012
5 Abbotts Rd Dandenong South Vic 3175
Ph:
(03) 9768 5777
Fax:
(03) 9768 5788
Em:
Web:
www.kimprod.com.au
© 2015 Kimberley Products. All rights reserved. In an ongoing commitment to product
quality we reserve the right to change specifications without notice. E&OE.
D/N: SKRB04-211015
BIN PLACEMENT (Fig. 5 & 6)
1.
Open the door sufficiently to clip the bin onto top bin
support.
2.
Hold bottom of bin out slightly while locating bin lip on
top bracket. Then push bottom of bin in until it snaps
into the bottom retainer.
A plastic liner should be used and it can be held in
position with the elastic cord supplied. All large size plastic
liners are suitable.
PUSH IN
PIVOT POINT
CAM PLATE
BOTTOM BIN
SUPPORT
ADJUSTMENT
TOGGLE
BIN LINER
ELASTIC CORD
LID
BIN
CABINET
DOOR
CABINET
Fig. 5
Fig. 6
