Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Similarly, to ensure continued enjoyment and use of your product, proper product adjustment, annually and periodically
as needed is the responsibility of the customer.
Assembly Instruc on
Recommend Tools
•
Hex Head screwdriver
Package Contents Qty.
•
Table Assembly
1
•
Legs
2
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part #
2126815
Rev B
Printed in U.S.A
© 2017 Kimball International, Inc.
Training Table
Leg Attachment
& Cable Adjustment
3
Each table should be examined on an annual basis to make sure the engage-
ment of the latches is adequate. The latch should engage the center rail a
minimum of 3 millimeters. (Figure D)
4
Cable tension can be adjusted as
needed. Locate the Cable adjustment
nut on the back of the Release handle.
Turn Nut clockwise to ghten the
tension on the Cable. Turn Nut counter
clockwise to loosen the tension on the
cable (Figure C).
Figure D
