Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Similarly, to ensure continued enjoyment and use of your product, proper product adjustment, annually and periodically
as needed is the responsibility of the customer.
Figure A
Assembly Instruc on
Recommend Tools
•
Hex Head screwdriver
Package Contents Qty.
•
Table Assembly
1
•
Legs
2
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part #
2126815
Rev B
Printed in U.S.A
© 2017 Kimball International, Inc.
Training Table
Leg Attachment
& Cable Adjustment
1
Align the table leg so
that the legs are
angled inwards on the approach side of
the table, opposite the release handle.
Place the table leg on the base rail,
align the legs moun ng plate holes
with the base rails nuts.
Install and
ghten the 4 screws per leg
into the
nuts (Figure B).
NOTE:
Angling the legs al-
lows proper
nes ng of the tables.
2
Place the work surface upside down
on a smooth, clean surface. Remove
the 4 screws in the 4 nuts per side,
that are located in the base rail
grooves (Figure A).
